This machine provide perfect internal cleaning , filling , capping P.c bottles with out any overflows
All the surface which contact with water made off stainless steel AISI 316 ,with CE certificate
the process & process time controlled by PLC , through the display monitor you can enter the parameter and read error mesages
Washing Group :
Bottles feed is done in horizontal way, after that go through 16 ,20,30 internal washing stations (according to the client demmand ) as following : prewashing , wash with warm medicated water, ozonated water, disinfectant, ozonated water, washing is carried out in six stages, including the last rinse Filling Water.
+ The discharge washing water of each stage go to lower tanks and the system prevent the washing water of each stage be mixed
+Due to the structure of the machine The washing process is done in closed area with fully sealed Windows
+ Through easy open covers , cleaning the tanks will be done easily
+ Using hot water which heated by resistance or steam are made according to customer demand.
+the motion of the nozzles in the medicated hot water washing stage provide cleaning inside the bottle and reched to all parts inside the bottles and cleaned it
+ After washing the inside and outside of the bottle it return to the tank through a sieve.
İn the last stage of the internal washing stations the botlles are rinsed by pressing the booster pump
and automatically transferred to the filling unit . Water goes directly into the pre-wash station in the station. Thus, water savings are done
+ P.C bottles upload as Horizontal and automatically way to Wash socket and cleaned through 16 stations.
+ The P.C bottles become upright position at the filling group and centrilized under filling nozzles
+Filling tank have 2 pumps (slow – fast ) so the filling is done and controlled without overflow
+Each nozlle have 3 actuators valves controleed by PLC and provide the filling without overflow (according to client demand it can be made flowcontrol system)
+The filler group has glass covers so monitoring the process is availabele and this covers opened easily
+ that carry air to enter into the body to prevent the outside air that HEPA filter system has been positive.
+By applicate positive air through HEPA filtir system , prevent Dirt and micro-organisms to enter inside the machine
Rotary and linear type is available
+ the conveyor which stopped during filling will be move after fillng process is finished and let the bottles pass to the clouser unit
+ the orientor let the capps go through the rail then it is taken from the channel by the end of the Bottles
+ caps washed by ozonated water (O3) during their going to the bottles
+ the process is done in closed ares and untouched . the process & process time controlled by PLC , through the display monitor you can enter the parameter and read error mesages
|Rinsing-Filling-Capping CPW-1||250 - 230|
|Rinsing-Filling-Capping CPW-2||450 - 430|
|Rinsing-Filling-Capping CPW-3||720 - 700|
|Rinsing-Filling-Capping CPW-4||960 - 900|
|Rinsing-Filling-Capping CPW-5||1200 - 1100|
|Rinsing-Filling-Capping CPW-7||1600 - 1500|
|Rinsing-Filling-Capping CPW-10||2400 - 2150|
|Rinsing-Filling-Capping CPW-10 -26||2000 - 2200|